4024PIH specification
RING 4024PIH Specification
PRINT METHOD*Thermal Transfer/Direct Thermal
*Harmonic(History Control Print Head)
DOT RESOLUTION600 dpi/ 23.6 dot per mm
PRINT SPEED1"- 2.5"/sec.(15mm - 65mm/sec.)
PRINT WIDTH4.15"/105mm
PRINT LENGTH7.1"/180mm
MEMORY*8MB SDRAM
*4MB Flash
MEDIA TYPE*Die cut labels
*Butt cut Labels tags
*Tag stock
*Roll stock(Continuous s/o die cuts)
*Fan Fold
MEDIA WIDTH*4.5"/116mm
MEDIA THICKNESS*0.0025" to 0.01"/0.0635mm to 0.254mm
SUPPLY ROLL CAPACITY*9.4"/240mm maximum diameter
RIBBON ROLL CAPACITY*2.95"/75mm maximum diameter
CABINET*All steel cabinet
LCD DISPLAY*2 lines by 8 characters(Alpha/Numeric)
*Back Light
SENSORS*Ribbon sensor (Reflective method)
*Label sensor(Transmit method)
*Media Home position sensor
(Transmit-Auto calibration method)
ERROR INDICATORS*Label/Ribbon empty
*Head open
*Communication
*Grammatical
*Parameter
(Each error is notified by buzzer and LCD
BAR CODE*Code39, Code93, Code128, NW7, 2 of 5(Industrial, Matrix and Interleaved), EAN-JAN 13/8, UPC-A/E, EAN128, QR Code,PDF417, Data Matrix, Maxi Code, RSS
FONTS-CHARACTER SIZE IN DOTS*8 character sets(Alpha/Numeric and symbols)8x8, 12x12, 16x16, 16x24, 24x24, 24x26, 32x40, 48x60
Expansion is 1-10 and 16 times
(Both directions)
*5-OCRB character sets(4 Numeric and 1 Alpha/Numeric)
Numeric-16x18, 24x27, 32x36 and 40x45
Alpha/Numeric-32x32
NOTE : Should not expand
Scalable Smooth Fonts,32-720 Dot width, 32-720 Dot length
Italic Slant Programmable 10, 15 and 20 degrees. NOTE : 8-31 Dots printing is available but must be matched properly with speed and media
*Down loadable font
PRINTING MODES & FUNCTIONS*Peel off, Tear off(demand type)with label back feed for top of label printing.
*Batch printing(Stip-for continous printing of labels. Can be used with optional External Rewinder)
*Butt cut label printing(Requires optional back side mark sensor)
PROGRAMMING LANGUAGE FEATURES*Advanced Label marking language-ALL
*ALL commmand are all ASCII characters. This allows flexibility with many environments and platforms
*Easy to program and format printing areas
*Pixel programming allows expanded area of up to 4 times
Four direction print rotation(0,90,180 & 270 degrees)
Reverse print and area fill in
*Mirror print
*Half Tones
*Lines, dotted lines, angle lines and boxes
Bit image data transfer and printing
*Downloadable graphics, text, font and formats to optional memory card
*Character Set(Code page)table
*Serializing(Numeric)
*Communication and print functions
*RLE data compression
*Graphic supported AIM, AIX, BMP, PCX(Monochrome only)
ADJUSTABLE PRINT FUNCTIONS SELECTABLE TROUGH FRONT PANEL OR BY SOFTWARE*Print Speed/Energy Settings
*Print Density
*Label Print Position
*Cutting Position
*Thermal Transfer/Direct Thremal
*Test Printing
*Ready/Pause
COMMUNICATION INTERFACE-SELECTABLE THROUGHT FRONT PANELL OR BY SOFTWARE*Parallel/USB(User select)
*RS232/to 115,200 baud rate, Line Control-RS-CS, XON-XOFF, ER-DR, Stop Bits, Parity, Data length
POWER SOURECEMultiple Power supply, Industrial standard, 115 volts +-10% AC50/60 HZ, 240 volts +-10% AC 50/60 HZ, Built to UL/CSA safety standard and FCC emissions standards.
ENVIRONMENTAL*Operating temperature 41 to 104 fahrenheit /5 to 40 Centigrade
*Relative humidity below 85% Non-condensing
*Ventilation : Air Movement
*Dust:Non-Conducting, Non-Corrosive
OPTIONS*Cutter(Slide type)
*Cutter(Non stop rotary type)
*External Label Stocker
*8MB Flash memory
*LAN interface 100 Base-TX/10 Base-T(TCP/IP Protocol)
SOFTWARE*BarTender Ultra Lite Plus
*Windows Drivers
DIMENSIONS*8.9"W x 11.8"H x 15.9"D(225mmW x 300mmH x 405mmD)
WEIGHT*27.5lb/12.5kg
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

Close